Description

The plugin consists of 3 components: audio filter, normalizer and voice-over side-chain. It can be apply to audio, video(with audio) and composition(with audio) layers.

1. Audio filter:

The plugin uses 7 audio filters:
A low-pass filter (LPF) is a filter that passes signals with a frequency lower than a selected cutoff frequency and attenuates signals with frequencies higher than the cutoff frequency.
A high-pass filter (HPF) is a filter that passes signals with a frequency higher than a certain cutoff frequency and attenuates signals with frequencies lower than the cutoff frequency.
A band-pass filter (BPF), is a filter that passes frequencies within a certain range and rejects (attenuates) frequencies outside that range.
A band-stop filter (Notch) or band-rejection filter is a filter that passes most frequencies unaltered, but attenuates those in a specific range to very low levels. Q is a narrow stopband.
A low-shelf filter amplifies or attenuates frequencies below the set frequency.
A high-shelf filter amplifies or attenuates frequencies above the set frequency.
A band-shelf filter amplifies or attenuates frequencies above and below the set frequency.
Q (or RES, bandwidth) determines the sharpness of the bandwidth, and the level or gain control which determines how much those frequencies are boosted or cut relative to frequencies much above or below the center frequency selected.
Gain level shows the level of gain or attenuation of the frequency band in dB.
Slope characterizes the smoothness of the cutoff frequencies mainly for cutoff filters. It shows how cool this cut will be.
Filter Wet – filtration power.